Blog

Catheter Tipping

Last updated on November 11, 2020 By B. Ray

There are several situations where induction may be a good choice for catheter tipping. Let’s examine some of those situations to see how the process works.

RF Induction

Induction is one of the safest catheter tips that you can use. When you use a catheter tipping procedure you will find that there is minimal risk of fire and explosion. There are only two risks that you will find in the induction process, one is the presence of an open flame and the other is the build up of metal shavings on the tip of the catheter. Both are pretty rare, but they are still important to know about.

With induction catheter tipping, the power generated by the RF electricity creates the heat in the stainless steel or gold plated mold, without touching the mold itself or even using a flame. The catheter tip is made out of the small plastic tube which is inserted into the heat-treated die or mold in order to form the hollowed corners. This plastic tube is then heated by the RF power in the circuit. This makes the plastic tube conductive and as a result it heats up the inside of the plastic tube and it cools down the surrounding area.

As this process takes place the temperature of the heat tube will remain constant. This allows the plastic tube to conduct heat from the circuit as well as direct the heat towards the edges of the plastic tube. This causes the heat generated to heat the plastic tube in the process of forming the hollowed corners. This heat is then conducted towards the catheter tip, heating it up to a temperature where the plastic tube has no problem conducting heat.

Don’t Burn The Tip

If there is an open flame or open electrical device near the tip of the catheter, you should never use a catheter tipping procedure using that device as it could cause a fire hazard. Always use only clean electrical devices near the catheter tip as these devices are not likely to contain lead or other hazardous material which could lead to an accidental fire.

The induction process has many other uses apart from simply forming the hollowed corners in the catheter tip. The process is also used to help increase the efficiency of the process, especially with a very narrow catheter tip.

Another reason why the process is used in induction is because the induction can heat up the catheter tip to a higher temperature than the surrounding environment. In this way the catheter tip can be heated to a more efficient temperature for easier insertion into the body. In addition, if the catheter tip is left in the body for a long period of time the internal heating will warm up to an acceptable level.

One thing to note is that the induction process can take a little longer than using a simple blowout to form the catheter tip. This is because it takes a longer amount of time to heat up the catheter tip. You will therefore need to make sure that you have a backup source of power available.

Forming The Tip

To perform the induction procedure the induction coil must be placed on the catheter tip. This coil will need to be placed onto the opposite side of the wire. This means that the coil will need to be placed on the other side of the wire as opposed to the end.

In order to ensure that the coil is placed on the other side of the wire you will need to hold the catheter tip in one hand and use your thumb and index finger to push the tip of the tip on the coil. in the opposite direction.

You should then release your hand from the catheter tip by pressing on the coil until the coil is located on the other side. of the wire. You should then do the same for the other end of the catheter so that the coil is placed on the opposite side of the wires as the tip.

As long as you have performed the induction correctly the catheter will form the plastic tube at a higher efficiency rate compared to the catheter tip when it is in its original state. If you need to heat the plastic tube to a more efficient level, you can always use a small blowout to heat the tube. However, if the catheter is a larger one you may need to use a blowout, which is designed for this purpose.

Woodworking Hand Tools

Last updated on September 27, 2020 By B. Ray

If you’re ready to start woodworking, then there’s a few different things you should know. There are five main categories of basic hand tools for woodworking. These are hand tools for shaping, cutting, finish, hold and measure wooden objects while making finished products. This category of tools cover everything that an average beginning woodworker would need for constructing simple to complex projects.

The most important tool in the Woodworking category is the Hand Saw. It’s important that you learn how to use the correct angle, length and weight of the wood saw so that your projects will be accurate.

Once you have your saw, the next essential tool is the Straightedge. There are several types of woodworkers straightedge, but all of them have the same end result, which is straight cuts made over an unbroken grain of wood.

The third tool in the Woodworking category is the Nail Gun. Using a nail gun is the fastest and easiest way to fasten projects together. Most nail guns come with a storage compartment or can be purchased separately.

Lastly, we have the Hammer. This is important because it creates pressure on the wood while making quick and accurate work of fastening projects together. The Hammer can be found in any hardware store.

In order to begin woodworking, you should first start by learning how to use each hand tools correctly. After this, you should start building on a project by adding other tools that will make your work easier and faster.

When you are ready to make your own projects, you should try to start with simple ones until you build up a little confidence. As you gain more knowledge and experience, you will learn how to build more complicated projects that require more skill, tools and techniques. before you move on to the next level.

While there are many more tools that are available for your collection, these are the basic hand tools you need to get started. and begin your journey. with the Woodworking category of tools.

It is important that you take the time to find the right tools for your project. Many people don’t like to work with tools that they may not know how to use properly. It is also very important to remember that the tools you use can greatly affect the quality of the finished product. Use these tips on how to start woodworking with hand tools to choose the right tools.

When you are looking for the right tool, consider the size of the project. Some tools are better for smaller jobs than others. Before you buy your first hand tool, make sure to measure out the area you are going to work with. to determine the amount of materials you will need. and how much room you will need in order to carry them.

Another factor to consider size is the type of projects you want to accomplish. Do you need a small project or a large one? Also factor in how much space is necessary to store the tools. The last thing you want is for the tool you choose to get stuck in a corner of your workbench. When using larger items, make sure to keep the tool out of the way.

Once you have decided on the type of woodworking you are interested in, you can search for information on basic tools for beginners on the internet. There are many websites that provide detailed information on tools and how to use each tool to achieve a perfect outcome. You will also find articles written by professional woodworkers to help you. along the way on how to start woodworking with hand tools.

Once you have all of the basic tools, you can start to work on more advanced projects. If you want to learn more about the basics of woodworking with hand tools then you can find many online tutorials to help you along the way.

Now that you know how do you start woodworking with hand tools, it is easy to follow directions. Take the time to look around at all of the different ways you can purchase the tools to get the best results possible. You don’t have to worry about learning the techniques because all of the information is readily available.

Join a Woodworking Group

Woodcraft workshops provide a very unique opportunity for families to spend time together doing something they enjoy. If you have never been involved in woodwork before, but would like to get started or improve your wood craft skills, this is a great place to start. If you have been a woodworker for some time, you can always join a woodwork workshop as well. It’s a very rewarding hobby to share your woodwork ideas and creations with other people who enjoy woodwork as much as you do. The workshops are usually held at local hardware stores or even online. There are also woodworking clubs where members can meet and share their woodwork thoughts. These are great ways to share your hobby ideas and have others share their woodwork ideas with you!

Woodworking is a very satisfying hobby and it has many benefits including being a part of a community that shares the same love of woodcraft. Woodwork provides a wonderful outlet for creativity and enjoyment. Woodwork workshops offer a great opportunity to share your woodcraft creations with others who share your same passion and enjoy woodcraft as much as you do. You can find a woodwork workshop in the area where you live or in the area near you. In order to find a woodworking workshop near you, just type “woodworking workshop “woodworking club” into your favorite search engine.

Find The Best Cocktails

Last updated on July 20, 2020 By B. Ray

cocktail is

classic cocktails

in a cocktail shaker

making cocktails

is a cocktail

best bars

best cocktails in

cocktail bar

into a chilled cocktail glass

cocktail recipes

best cocktails in the world

your cocktails

serving cocktails

is the best

cocktail was created

the world’s best cocktails

a refreshing cocktail

ASUS GTX 1060 For My Niece

Last updated on April 25, 2019 By B. Ray

ASUS GTX 1060 is a Great budget card!

My niece primarily playing the dying game Archeage. She has a mid-range card that is 2 generations old. Nvidia made a huge jump with their latest architecture. So it is really prime time to upgrade.

This brings me to the Asus GTX 1060, it will bottleneck the CPU at 1080P. My niece doesn’t play on a monitor with any higher resolution than that. I always try to consider the current equipment before upgrading. So my initial advice would always be what monitor do you have. So for my niece with having a monitor that only does 1080P @ 60Hz the Nvidia 1060 would be a good fit and should future proof it for a while.

The highest price I have seen for this card at the time of writing is a little over $400. There are other models that cost less but they are not all created equal. Some brands use sub-par components and won’t last as long.

I would suggest that you get the 6GB version. While the 3GB will get you by the 6GB will ensure you will be able to play all the modern games. On some AAA titles having the 3GB will slow you down by double-digit percentage points. This also gives you more longevity when it comes to games that will have a minimum spec for this in the future. There isn’t anything really fancy about this card. And it doesn’t make a lot of sense to have it packed full of cool features.

The Nvidia 1060 uses the GP106 and has 1,280 CUDA cores. This is more than the 1,024 found on the previous-generation GeForce GTX 960.
The Nvidia 1060 also has a higher boost clock speed than its big sister, the Nvidia 1070, topping out at 1.7GHz.

Crypto Mining

Let’s talk about cryptocurrency. The Asus GTX 1060 6GB Ethereum hash rate on stock settings is about 19 Mh/s. The power consumption will be 100W. How hot will the card get? It will get to 68C (154.4 F). You can make a decent return on this card if you pay attention to the changes in exchange rates and switch coins when it is the most profitable. I’ll say this every time, the boom of cryptocurrency and mining has made the prices of cards jump a bit.

Cryptocurrency

Overall

The Asus GTX 1060 is a great budget card. At the time of this writing it is perfect for someone with a 1080P screen. Check out the ASUS GTX 1060 below.

[amazon_link asins=’B01IPVSG4C,B01IPVSN1S,B01JHQT1SE,B072172ZDK’ template=’ProductCarousel’ store=’johnso02-20′ marketplace=’US’ link_id=’e687ff17-af0c-11e7-b16f-f11f6106da8d’]

Check out other technology bits HERE!

Ballroom Dancing ~ Dancing in a Gown ~

Last updated on April 25, 2019 By B. Ray

Ballroom Dancing

The term “Ballroom Dancing” is derived from the word ball, which in turn originates from the Latin word ballare which indicates “to dance.” Its development more than likely came from basic folk dancing taken pleasure in by the peasant classes which were then formalized by the upper-class nobility during the time of the Enlightenment.

History

Ballroom dance dates back to a minimum of the age of court balls lavishly carried out by the Ancient Regime of France under Louis XVI in the 1700s and of the other European aristocracy of England, Austria, and Russia.

In her memoirs, Souvenirs Madame Elisabeth Vigee Le Brun, main portraitist to Marie Antoinette, stated of dance in her age, “They danced the waltz with such frenzy that I might not think of how all these individuals, spinning around at such rate, did not get giddy and drop; however males and females are so accustomed to this violent workout that they did not take a single break as long as the ball lasted.

They likewise often danced the Polonaise, far less fatiguing, for it is nothing more than a procession throughout which twosomes promenade in majestic style.

It marvelously matches pretty women as it manages all the needed time to appreciate their figures and deals with.”
While the Puritans who settled in the New World prevented dance of any kind, ballroom dance still discovered a welcome reception among colonists.

John Quincy Adams as soon as participated in a dance marathon and George Washington raised eyebrows by dancing with a female partner for three complete hours. In fact, it is at George Washington’s inauguration that the precedent for ballroom dance in the new republic was developed.

At eighteenth-century assembly balls individuals danced the minuet, the cotillion, and the allemande. Gentlemen were advised to not use coarse language and to lay aside their swords at the door.

In 1823 dance was made an official course taught at West Point Academy and in 1885 Alan Dodworth, a preeminent dance instructor, wrote, Dancing and Its Relation to Education and Social Life, codifying five standard positions of good dancing.

Teachers in both England and the United States, from the 1870s on, began to form professional associations and developed a ballroom design that was official, sleek, and classy, and still forms the basis of competitive dancing today.

Today, the term Ballroom Dance may apply to any among the a number of dances in which 2 individuals, a “leader” and a “follower,” dance with physical contact through their upper or lower bodies, or just through their arms depending on the dance.

Because the majority of social dancing is not choreographed, this contact is required for the leader to interact the next dance move to the follower, and for the fan to react to this lead.

This stands in stark contrast with the style(s) of dance seen in clubs and other social gatherings where physical contact tends to be optional and the individuals in question can move easily without any such restraints imposed by company physical contact or by the necessity to follow the balanced pattern present in the music.

Some understanding of action patterns is necessary for both the leader in addition to for the fan to be able to successfully practice the art of Ballroom Dancing.

Dance historians usually mark the appearance of the twist in the early 1960s as completion of social partner dancing. In the contemporary dance age, dance became less structured and less depending on understanding and special training.

However, throughout times of economic crisis and war, ballroom dance re-captures some of its appeal as it harkens back to a simpler age when dance could be thoughtful, formal, and shared by all ages, and both sexes alike.

Ball Gowns

There is no more ideal opportunity to wear a grand gown than your wedding event or prom night. A white ball dress or girly ball dress in vivid colors can make your princess dream become a reality.

Include a regal vibe to your prom outfit, and select from the super-full skirts, layers of stain, tulle and crinoline that are charming addition to these remarkable dresses offered at our online shop. From vintage to fashion-forward styles, our amazing ballgowns are available in all colors and sizes.

With the waist portion tapering much like a bodice, Couture Candy’s ball dress senior prom gowns bloom out from the waist to reach a minimum of to the ankles, or sometimes even to the flooring.

All of these luxury gowns are made from unique and stylish fabrics like silk, velour, satin, and taffeta, with additional decors of abundant lace, fragile embroidery, sophisticated ruffles, sequins, and pearls.

Couture Candy uses something for every style, shape and budget plan. From inexpensive and affordable, to high quality and luxurious, our fairy tale princess dresses suit a lot of body types and look incredible in pictures.

Choose highly embellished red gown in a swirling flower pattern along the bodice, with a lovely large impression bateau neckline, and silver stones gleaming to excellence, or shimmer throughout the night in a romantic chiffon senior prom dress in champagne color decorated with opal stones, and a high leg slit for a royal touch.

Best Pellet Smoker | Buy Pellet Smoker

Last updated on April 25, 2019 By B. Ray

Best Pellet Smoker

We all love smoked meats, but there are some issues for the regular joe.

Don’t get me wrong, smoked brisket is a thing of wonder. And for the uninitiated smoked ribs can be heavenly. But it does take time and resources.

With traditional wood-fired or charcoal smokers, you can find yourself slaving over the grill. And honestly, even if you take the time, it takes some real skill to get the temperature and process to give the perfect smoke.

But, that is why you are here. You want better options to get more carefree smoke.

Pellet smokers can give you the smoke you want and control you need.

How do Pellet Smokers work?

Pellet smokers are not the mystery you think they are. While we will focus on pellet smokers there are also pellet grills. They both are very similar to the coal-fired and gas-fired grills.

When we talk about grills, pellet smokers have not been out that long. One of the first was put on the market in the 1980s. People have been cooking over wood since recorded history. So this is a really new concept.

In many ways, a pellet smoker is just a wood smoker. The pellets are compressed sawdust. Due to the compression, it makes them dense. And that density allows each pellet to hold more energy. This makes pellets more efficient than regular wood.

When you use pellets not many changes in the grill itself. The biggest change is a hopper attached to the side. The core apparatus looks similar if not identical to a standard gas grill.

The Benefits of Smoking with Pellets

So why would you use a pellet smoker? The benefits are pretty cool. These are really easy to use. You don’t have to try to control the temp with a big block of wood. If you have ever smoked before every time you add wood you will see a spike in temp.

That can ruin your 8-hour brisket.

Not to mention you have to be there. Being consistent with the heat can be tricky. Using pellets can give you consistent heat for many hours.

Again, you can do the same thing with other grills. But it will take so much more skill to do so. This is why you want to look at a pellet smoker.

Choose the Best Pellet Smoker

You will see a lot of different shapes and sizes. They all work basically the same way. At the different, price points you will get different bells and whistles. This would include things like digital readouts.

Built-in Thermostat

In order to slow cook with pellets, you will need a thermostat. The thermostat triggers the feed to put more pellets in the grill.

You won’t see a pellet smoker get higher than 400 to 500 degrees Fahrenheit. If you want to get a sear, make sure your grill has that ability.

Smoker Pellets

All pellets are not made the same. Make sure you read the instructions to make sure you get the right ones. That said some brands recommend only using their pellets.

When you go to buy the pellets you can see the size. So may not have to get the same brand every time. Test and see, not all pellets perform the same.

Other Features

Speaking of searing, find a grill with a searing compartment. If you are looking for portability some grills have folded up legs that are great for camping.

By using a full-electric model you can get the greatest control smoking your meats.

One last thing. A grill won’t make your meats taste great. The grill master does. Here, buy this book to help: Wood Pellet Cookbook

So, I am going to give you options for the best pellet smokers. Let’s take a closer look at these top pellet smokers on the market.

Twin Eagles 36-Inch Built-in Stainless Steel BBQ Pellet Smoker And Grill

All 304 stainless steel, seamless heli-arc welded construction and signature hi-polished accents
3-Tiered cooking racks (racks included)
Internal halogen lights for nighttime cooking
Temperature range of 140 – 725 degrees Fahrenheit
Wi-Fi Enabled

Memphis Grills Elite Wood Fire Pellet Smoker Grill Wi-Fi (VGB0002S)

Built-in wood pellet smoker grill
304 stainless steel construction
24-pound capacity hopper offers up to 62 hours of cook time; Temperature range between 180 and 700 degrees Fahrenheit
Can be controlled via Wi-Fi controller (iOS or Android app)
Overall size: 46 x 32 x 28 inches (W x D x H); Cutout: 42.625 x 24.5 x 16.75 inches (W x D x H); Cooking Grid: 37.375 x 17.625 inches (W x D)